This is a glossary of terms that are found in
drawings and catalogs when using your HISAKA product.
| S distance piece gasket | The gasket for non-wetted part of D-plate and E-plate. | |
|---|---|---|
| Semi-welded plate | One of the heat exchangers in the HISAKA lineup This plate is composed of two heat transfer plates welded together. |
|
| Serial number | 6-digit number required to identify the equipment (Letters of the alphabet may be added after the number.)
|
|
| Silicone adhesive | Adhesive that is used when sticking a silicon gasket | Click here for details |
| Sincerity | Company motto 1. Be a "sincere" person. 2. Create products with a "sincere" heart. 3. Foster a "sincere" corporate environment. |
Click here for details |
| Slit-in gasket | Installed by inserting a plate gasket into a heat transfer plate, without using adhesive Effective when there is little time to perform maintenance work or when there are restrictions on the use of adhesives. * Adhesive is used for D gaskets, E gaskets, and distance piece gaskets. * Some heat transfer plates do not support slit-in gaskets. |
|
| Small holes | Small holes that are opened in the portholes on heat transfer plates
|
|
| Small model | Models that are applicable for designs with small flow rates (Examples: RX, LX, UX-10, LX-00) |
|
| Special hole plates | One of the hole opening specifications for heat transfer plates Refers to heat transfer plates other than those that have all portholes open (or all closed)
|
|
| Splash prevention cover (Protective cover) |
Cover (usually metal) to prevent fluid that is leaking from the heat transfer plates from splashing and to prevent contamination by flying objects in a certain environment It covers the top and both sides of the heat transfer plates while the equipment is operating. |
|
| Sticking accordingly | Selecting plate gaskets that are appropriate for each of the fluids flowing through the B side and A side, and sticking plate gaskets made of different materials to the appropriate location on the heat transfer plates | |
| Stopper | Structure or part that fixes one end of a tightening bolt
|
|
| Stud bolts and nuts | Bolts and nuts that are used to connect piping when using N, TN, and KN nozzles | |
| S-1 bond | Adhesive for sticking conventional plate gaskets | Click here for details |
| S. frame | Frame that is fastened to the E. frame using tightening bolts to maintain pressure inside the equipment | Click here for details |
| S. nozzle | Nozzle installed on the S. frame |
